Advanced Category Search:
 

Engine Case Tools

Property categories:


Product Image Item Name- Model Price
Balancer Bearing Remover and Installer Tool for 1999-UP Big Twins

Balancer Bearing Remover and Installer Tool for 1999-UP Big Twins

HD-OEM: 44066 Part Number: 16-0540 UOM: 1 - EA Summary: Jims balancer bearing remover and installer tool pulls the bearings from the B model Softail motor case in one easy smooth motion preventing any damage to the bearing bores. The installing...
16-0540 $138.13

... more info
 Sold Out 
To be notified when this product is back in stock please click here.

Balancer Shaft Alignment Tool for 1999-UP Big Twins

Balancer Shaft Alignment Tool for 1999-UP Big Twins

Part Number: 16-1166 UOM: 1 - EA Summary: Use the Jim's balancer shaft alignment for correct balancer drive assembly. Tool will maintain a long life of your balan cers drive chains and bearings. Tool will work out the setting up of your sprocket and...
16-1166 $255.61

... more info
 Sold Out 
To be notified when this product is back in stock please click here.

Case Cylinder Spigot Bore Tool up to 3.8125" Jims

Case Cylinder Spigot Bore Tool up to 3.8125" Jims

Part Number: 16-1409 UOM: 1 - EA Summary: This Jims spigot bore tool allows the boring of cylinder spigot hole up to 3.8125" by using the stock cylinder base holes. Fitment: FXST 1984-1998 FLST 1986-1998 FXD 1991-1998 FLT 1984-1998 FXR 1984-1994...
16-1409 $1,138.01

 Buy Now 

Crank Flywheel Nut Socket Tool for 1954-1981 FL & FX

Crank Flywheel Nut Socket Tool for 1954-1981 FL & FX

HD-OEM: 23966-54A Part Number: 16-1809 UOM: 1 - EA Summary: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. Fitment: FL...
16-1809 $92.23

 Buy Now 

Crank Flywheel Nut Socket Tool for 1983-1986 Big Twins

Crank Flywheel Nut Socket Tool for 1983-1986 Big Twins

HD-OEM: 23969-83 Part Number: 16-1810 UOM: 1 - EA Summary: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. Fitment: FL...
16-1810 $91.85

 Buy Now 

Crank Flywheel Nut Socket Tool for XL 1981-UP Sportsters

Crank Flywheel Nut Socket Tool for XL 1981-UP Sportsters

HD-OEM: 23901-81 Part Number: 16-1813 UOM: 1 - EA Summary: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. Fitment: XL...
16-1813 $92.20

 Buy Now 

Jim Case Splitter Tool for 2006-UP Big Twins

Jim Case Splitter Tool for 2006-UP Big Twins

Part Number: 16-1354 UOM: 1 - EA Summary: Use this tool to expertly and safely break the case sealant by pushing apart both halves. This tool bolts to the primary mounting holes with supplied hardware. Hand thread in pushing screw. The flywheels...
16-1354 $302.97

 Buy Now 

Jim Timken Bearing Simulator Tool for 1970-98 Big Twins

Jim Timken Bearing Simulator Tool for 1970-98 Big Twins

HD-OEM: 1745 Part Number: 16-0706 UOM: 1 - EA Summary: Jim Timken bearing simulator tool is designed to allow quick and easy removal and replacement of flywheel assembly in the left side crankcase when checking rod to case, piston to flywheel or...
16-0706 $81.55

... more info
 Sold Out 
To be notified when this product is back in stock please click here.

Jims 1981-1989 Big Twins Pin Flywheel Nut Socket Tool

Jims 1981-1989 Big Twins Pin Flywheel Nut Socket Tool

Part Number: 16-0886 UOM: 1 - EA Summary: Jims pin flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" drive. Fitment: FL 1981-1984 FX 1981-1984...
16-0886 $45.33

... more info
 Sold Out 
To be notified when this product is back in stock please click here.

Jims 1999-UP Big Twins Crankshaft Bearing Tool

Jims 1999-UP Big Twins Crankshaft Bearing Tool

Part Number: 16-1672 UOM: 1 - EA Summary: This crankshaft locking tool locks all crankshafts by engaging the pinion shaft splines. This allows removal and torquing of the pinion nut during installation. Fitment: FXST 2003-UP FLST 2003-UP FXD 2003-UP...
16-1672 $191.33

... more info
 Sold Out 
To be notified when this product is back in stock please click here.

Jims 1999-UP Big Twins Flywheel Locking Tool

Jims 1999-UP Big Twins Flywheel Locking Tool

Part Number: 16-2753 UOM: 1 - EA Summary: Jims Twin Cam flyhweel locking and decommissioned tool locks the flywheel in place making service procedures easier. This tool is very visable and useful to designate a bike as decommissioned. The bike will...
16-2753 $42.00

 Buy Now 

Jims Balancer Retainer Tool for 2000-UP Softails

Jims Balancer Retainer Tool for 2000-UP Softails

Part Number: 16-1858 UOM: 1 - EA Summary: Used to hold the hydraulic tensioners in place when repairing Beta engines. Hydraulic tensioners are used to keep constant chain tension on the counter balancer system. Without the use of these retaining...
16-1858 $42.91

 Buy Now 

Jims Balancer Shaft Inner Baring Service Tool for 1999-UP Big Twins

Jims Balancer Shaft Inner Baring Service Tool for 1999-UP Big Twins

Part Number: 16-1915 UOM: 1 - EA Summary: Jims balancer shaft inner bearing service tool is used to remove and install bearing on all 2000-up Twin Cams. This tool will accurately remove and install the inner balancer bearing mounted in the left...
16-1915 $228.47

 Buy Now 

Jims Case Bolt Spot Face Tool for 1999-UP Big Twins

Jims Case Bolt Spot Face Tool for 1999-UP Big Twins

Part Number: 16-0381 UOM: 1 - EA Summary: Tool is needed to spot face the right case so that the bolt head will seat flat on the case surface. This tool is required when any Twin Cam case spigot hole is enlarged for Big Bore Cylinders Tool is needed...
16-0381 $120.49

 Buy Now 

Jims Case Lap Tool for 1958-1998 Big Twins

Jims Case Lap Tool for 1958-1998 Big Twins

Part Number: 16-1835 UOM: 1 - EA Summary: Jims case lap tool features a lap which is supported on both sides by a pilot on the bushing side and plate which locates on the case pins of the cam cover. Fitment: FL 1958-1984 FX 1971-1984 FXD 1991-1998...
16-1835 $1,169.17

 Buy Now 

Jims Case Support Block Tool for 1999-UP Big Twins

Jims Case Support Block Tool for 1999-UP Big Twins

Part Number: 16-1916 UOM: 1 - EA Summary: Jims case sport block tool attach to the outer side of the engine case under the balancer bearing pads surface. This is to protect the left engine case while servicing the inner balancer bearings. Fitment:...
16-1916 $98.35

 Buy Now 

Jims Center Case Bolt Oversize for 1999-UP Big Twins

Jims Center Case Bolt Oversize for 1999-UP Big Twins

Part Number: 16-0380 UOM: 1 - EA Summary: Required when any Twin Cam case cylinder spigot hole is enlarged for Big Bore cylinders. Fitment: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Tech. Notes: Suggested to use with #16-0381 case bolt tool....
16-0380 $25.33

 Buy Now 

Jims Crank Assembly Removal Tool

Jims Crank Assembly Removal Tool

Part Number: 16-1839 UOM: 1 - EA Summary: This removal tool is used to press flywheels from cases, press cases apart and break the sealant bond easily and safely. Fitment: All models Country of Origin: USA
16-1839 $244.64

 Buy Now 

Jims Crank Shaft Guide White for 1999-UP Big Twins

Jims Crank Shaft Guide White for 1999-UP Big Twins

Part Number: 16-1281 UOM: 1 - EA Summary: Use this crank shaft guide to spread pinion bearing rollers while reassembling right side engine case on to flywheel assembly. Fitment: FXST 1999-UP FLST 1999-UP FXD 1999-UP FLT 1999-UP Country of Origin: USA
16-1281 $43.00

 Buy Now 

Jims Crankshaft Gear Locking Tool for XL 1991-1999

Jims Crankshaft Gear Locking Tool for XL 1991-1999

Part Number: 16-1666 UOM: 1 - EA Summary: This locking tool is used on pinion side to keep crankshaft assembly from rotating during assembly on valve train repair . Fitment: XL 1991-1999 Country of Origin: USA
16-1666 $59.88

 Buy Now 

Jims Flywheel Holding Tool for 2006-UP Big Twins

Jims Flywheel Holding Tool for 2006-UP Big Twins

Part Number: 16-0326 UOM: 1 - EA Summary: Jims flywheel holding tool is used to hold flywheel assembly in vise with or without left case attached. Can also be used to check case clearance on stroker flywheels. Fitment: FXD 2006-UP FXST 2007-UP FLST...
16-0326 $102.97

 Buy Now 

Jims Flywheel Runout Gauge Tool for 1970-UP Big Twins

Jims Flywheel Runout Gauge Tool for 1970-UP Big Twins

Part Number: 16-0383 UOM: 1 - EA Summary: Allows the engine builder to check flywheel run out of the pinion shaft while assembled in the engine case. Also allows the checking of gear lash on gear driver cams on Twin Cam engines. Fitment: FL...
16-0383 $128.46

 Buy Now 

Jims Flywheel Truing Tool

Jims Flywheel Truing Tool

Part Number: 16-0325 UOM: 1 - EA Summary: Jims flywheel truing tool is to tune flywheel assemblies when truing. This tool features both a flywheel expander and contractor in one easy to use package. Use on all tapered shaft flywheel assemblies....
16-0325 $474.61

 Buy Now 

Jims Hard Cap Tool for 1955-UP Big Twins

Jims Hard Cap Tool for 1955-UP Big Twins

Part Number: 16-0666 UOM: 1 - EA Summary: Jims hard cap tool protects shaft when using press. Fitment: FL 1955-1984 FX 1971-1984 FXST 1984-UP FLT 1979-UP FLST 1986-UP FXD 1991-UP Country of Origin: USA
16-0666 $56.55

 Buy Now 

Jims Interconnect Seal Testing Tool for 2000-UP Softails

Jims Interconnect Seal Testing Tool for 2000-UP Softails

Part Number: 16-1859 UOM: 1 - EA Summary: Used to check the sealing of interconnect seal. For use on OEM 45359-00 interconnect seal. This seal is required to seal the oil passageway from the right case to the balancer tensioner plate in all Beta...
16-1859 $54.88

... more info
 Sold Out 
To be notified when this product is back in stock please click here.