Engine Case Tools

Property categories:

Item Name-	Model	Price
Jims Needle Bearing Rod Tool for XL 1960-UP Sportsters HD-OEM: 97273-60 Part Number: 16-1857 UOM: 1 - EA Summary: This rod installs needle bearings without damage. Fitment: XL 1960-UP Country of Origin: USA	16-1857	$81.43 Buy Now
Jims Rod Race Press Tool for Big Twins & Sportsters Part Number: 16-1838 UOM: 1 - KIT Summary: The Jims rod race press tool makes for easy installation or extraction of rod races and making it easy to support without bending rods. Fitment: EL 1936-1940 FL 1941-1984 FX 1971-1984 FXST 1984-1998 FLST...	16-1838	$213.71 Buy Now
Jims Sportster Crankshaft Locking Tool for XL 2000-UP Sportsters Part Number: 16-1665 UOM: 1 - EA Summary: This locking tool is used on pinion side to keep crankshaft assembly from rotating during assembly on valve train repair . Fitment: XL 2000-UP Country of Origin: USA	16-1665	$59.88 Buy Now
Jims Sprocket Shaft Holder Tool for 1955-UP Big Twins Part Number: 16-0683 UOM: 1 - EA Summary: Jims sprocket shaft holder tool holds the flywheel assembly in a vise with or without the left case attached. Fitment: FL 1955-1984 FX 1971-1984 FXST 1984-UP FLT 1979-UP FLST 1986-UP FXD 1991-UP FXR...	16-0683	$123.43 ... more info Sold Out To be notified when this product is back in stock please click here.
Jims Sprocket Shaft Seal Installer Tool for XL 1995-UP Part Number: 16-0661 UOM: 1 - EA Summary: Jims sprocket shaft seal installer tool is designed to install sprocket shaft seal to proper depth and for holding the seal perfectly square for a no leak fit. Fitment: XL 1995-UP Tech. Notes: Suggested to...	16-0661	$114.56 Buy Now
Jims TC-88 Crankshaft Rear Bearing Tool for 1999-UP Big Twins Part Number: 16-1275 UOM: 1 - EA Summary: This crankshaft bearing tool is designed to remove and repla ce the right crankcase bearing in and out with no damage to crankcase. Fitment: FXST 1999-UP FLST 1999-UP FXD 1999-UP FLT 1999-UP Country of...	16-1275	$194.19 Buy Now
Jims Timken Bearing Puller Tool for XL 1957-1976 Sportsters Part Number: 16-0667 UOM: 1 - EA Summary: Jims Timken bearing puller tool removes the inner Timken bearing from the sprocket shaft, without removing the shaft from the flywheels. Fitment: XL 1957-1976 Country of Origin: USA	16-0667	$286.39 Buy Now
Jims Timken Bearing Race Installer Tool for 1969-98 Big Twins & XL HD-OEM: 94547-80A Part Number: 16-0668 UOM: 1 - EA Summary: Jims Timken bearing race installer tool is used when installing bearing races in the left crankcase. Use this tool to press in bearing races straight, time after time. Tool can be used on...	16-0668	$259.29 Buy Now
Jims Timken Bearing Remover Tool for 1986-98 Big Twins HD-OEM: 1709 Part Number: 16-0704 UOM: 1 - EA Summary: Jims Timken bearing remover tool will remove the sprocket shaft Timken bearing. This is a specialized tool to do the job better than anything else. Fitment: FXST 1986-1998 FLST 1986-1998 FLT...	16-0704	$241.33 ... more info Sold Out To be notified when this product is back in stock please click here.
Jims VO Scope Tool Part Number: 16-0385 UOM: 1 - EA Summary: Allows the technician the ability to look inside most any hole that is larger than 1/4" . This is a live remote video and features high resolution focus, color camera, and a 2-1/2" full color viewing...	16-0385	$337.74 Buy Now
Jims XL 1981-UP Crank Flywheel Nut Socket Tool HD-OEM: 23901-81 Part Number: 16-0887 UOM: 1 - EA Summary: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" drive. Fitment: XL...	16-0887	$49.88 ... more info Sold Out To be notified when this product is back in stock please click here.
Pin Flywheel Nut Socket Tool for 1981-1989 Big Twins HD-OEM: 24017-80 Part Number: 16-1811 UOM: 1 - EA Summary: Jims pin flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. Fitment: FL...	16-1811	$86.05 ... more info Sold Out To be notified when this product is back in stock please click here.
Shaft Turning Tool Jims for 2006-UP Big Twins Part Number: 16-1378 UOM: 1 - EA Summary: This Jims shaft turning tool fits spline or taper on assembled motor and allows engine to be turned over by 1/2" ratchet or impact driver. Fitment: FXD 2006-UP FLST 2007-UP FXST 2007-UP FLT 2007-UP Country...	16-1378	$132.57 Buy Now
Snap Ring Remover Tool for 1990-1998 Big Twins Part Number: 16-0705 UOM: 1 - EA Summary: Snap ring remover tool will remove the Timken bearing outer race snap ring without damage to the case. You can replace the snap ring in Big Twin cases without the fear of gouging the aluminum on the cases....	16-0705	$113.69 Buy Now
Sprocket Flywheel Nut Socket Tool Jims for 1972-1986 Big Twins Part Number: 16-1812 UOM: 1 - EA Summary: Jims sprocket flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" Drive. Fitment: FL 1972-1984 FX...	16-1812	$99.85 Buy Now
Sprocket Shaft Bearing Installer Tool for XL 1979-2003 HD-OEM: 37047-91 Part Number: 16-1761 UOM: 1 - EA Summary: Sprocket shaft Timken bearing installer tool is used to inst all crank shaft assemblies into crankcase. This tool also can be used to install the bearing until tool runs out of threads. Tool...	16-1761	$44.75 Buy Now
Sprocket Shaft Bearing Installer Tool Jims for XL 1977-2003 Part Number: 16-1760 UOM: 1 - EA Summary: Sprocket shaft Timken bearing installer tool is used to install crank shaft assemblies into crankcase. Tool is 2.500" long. Fitment: XL 1977-2003 Tech. Notes: Required to use with #16-1761 Sprocket shaft...	16-1760	$45.33 Buy Now
Sprocket Shaft Bearing Tool for 1954-1976 K & XL HD-OEM: 97081-54 Part Number: 16-1837 UOM: 1 - EA Summary: Jims sprocket shaft bearing installer tool is used to instal l flywheel assembly into left crankcase Timken bearing. If using this tool on a 1977-up XL we require using the 2.500" and 2060"...	16-1837	$191.21 Buy Now
Sprocket Shaft Bearing Tool for 1955-1998 Big Twins HD-OEM: 97225-55 Part Number: 16-1836 UOM: 1 - EA Summary: Jim sprocket shaft bearing installer tool Fitment: FL 1955-1984 FX 1971-1984 FXST 1998-1998 FLT 1979-1998 FXD 1991-1998 FLST 1986-1998 FXR 1982-1994 Country of Origin: USA	16-1836	$205.50 Buy Now
Sprocket Shaft Bearing Tool for 1955-2003 Big Twins & Sportsters HD-OEM: 94547-80A Part Number: 16-0058 UOM: 1 - SET Summary: Sprocket shaft bearing tool removes and installs engine sprocket shaft bearings from crankcase. Tool is a 2 part set. Sold as a 4 piece set. Fitment: FL 1955-1984 FX 1971-1984 FXST...	16-0058	$150.86 Buy Now
Sprocket Shaft Seal and Lock Installer for FL 1955-1969 HD-OEM: 97235-55B Part Number: 16-0888 UOM: 1 - EA Summary: Sprocket shaft seal wrench tool installs and removes bearing nut on Big Twin models. Fitment: FL 1955-1969 Country of Origin: USA	16-0888	$142.06 Buy Now
Sprocket Shaft Seal Install Tool for 1970-1998 Big Twins Part Number: 16-1754 UOM: 1 - EA Summary: Sprocket shaft seal and lock installers for Big Twins. Use with a bearing tool to help install seal. Fitment: FL 1970-1984 FX 1971-1984 FXST 1984-1998 FXR 1982-1994 FXD 1991-1998 FLST 1986-1998 FLT 1979-1998...	16-1754	$114.19 Buy Now
Timken Bearing Remover Tool for 1955-1984 FL & FX Part Number: 16-1834 UOM: 1 - EA Summary: Jims Timken bearing remover tool removes the bearing from the shaft without removing the shaft from the flywheel. Fitment: FL 1955-1984 FX 1971-1984 Country of Origin: USA	16-1834	$263.64 Buy Now
Timken Bearing Remover Tool for XL 1977-UP Sportsters Part Number: 16-1833 UOM: 1 - EA Summary: Jims Timken bearing remover tool removes the bearing from the shaft without removing the shaft from the flywheel. Fitment: XL 1977-UP Country of Origin: USA	16-1833	$290.45 Buy Now

Displaying 26 to 49 (of 49 products)

[<< Prev] 1 2

Copyright © 2018 Biker Part Superstore
Site content and prices are subject to change without notice. Be advised that all orders placed on BikerPartSuperstore.com are processed and charged in U.S. Dollars (USD) only, regardless of the currency selected at or prior to checkout. Prices quoted in non-USD currencies are provided for information purposes only and may not accurately reflect actual foreign currency exchange rates at the time of purchase (see theTerms of Usepage for more information). All trademarks and trade names referred to on the BikerPartSuperstore.com website are the property of their respective trademark holders. Use of the word Harley-Davidson®, various model names and designations, and OEM part numbers are provided solely for reference and application information and there is no affiliation between Harley-Davidson®, Inc. and Biker Part Superstore. See thedisclaimerspage for further clarification.